10000	"Are you sure you want to permanently delete this QSO with "
10001	" from the Logbook"
10002	"Your last chance ..."
10003	"Error deleting QSO with "
10004	"db Delete Error : "
10005	"Error updating QSL data for this QSO with "
10006	"db Read Error : "
10007	" : Rotor port COM "
10008	"You have no Comm port selected"
10009	"Select a Comm port"
10010	"File error writing ADIF."
10011	" record was exported."
10012	" records were exported."
10013	"Export completed"
10014	"Error positioning EOF for Index "
10015	"db EOF Error : "
10016	"Sorry, there appear to be no QSOs that have "
10017	" fields entered.  This search will be cancelled."
10018	"Invalid entry"
10019	"Failed to read QSOs from "
10020	"dbError : "
10021	"The Radio polling interval is adjustable between 50 and 5000 (50 msec to 5 sec).  A setting of 1000 is 1 second."
10022	"Incorrect polling interval"
10023	"The Icom address must be a Hex number between 0 and 7F."
10024	"Incorrect Icom address"
10025	" is not a valid frequency."
10026	"Huh?"
10027	"Error # "
10028	"I could not find a CD drive.  Please check the documentation and set a default CD drive."
10029	"Invalid CD"
10030	"Reported by CDLookup.exe"
10031	" : Not found in database."
10032	"File error writing CSV."
10033	" : Rotor port COM "
10034	"Rotor port is not open!"
10035	"Sorry, "
10036	" is not a valid grid square"
10037	" is not valid for Latitude and/or Longitude.  Quit fooling around."
10038	"See, I know what I'm doing"
10039	" is not a valid Latitude."
10040	"I know how to do this stuff."
10041	" is not a valid Longitude."
10042	"To make a DX Spot, you must have a frequency entered"
10043	"There is no callsign entered in the Logbook Entry window."
10044	"Do you want to make a DX Spot of the last QSO in your Logbook?"
10045	"Unable to retrieve the last QSO in the logbook"
10046	"No Telnet session found."
10047	"The Cluster port is not open."
10048	"Port error."
10049	"The Data Terminal port is not open."
10050	" have been copied into the eQSL file."
10051	"No eQSL flags found."
10052	" QSOs with "
10053	" have been copied into the eQSL file.  Do you want to flag these QSOs as now having been sent to eQSL?"
10054	"Delete eQSL flags?"
10055	"There are no QSOs with "
10056	" flagged to be put in the eQSL file."
10057	"Invalid selection"
10058	" QSOs by "
10059	" have been copied into the LOTW file."
10060	"No LOTW flags found."
10061	" have been copied into the LOTW file.  Do you want to flag these QSOs as now having been sent to LOTW?"
10062	"Delete LOTW flags?"
10063	" flagged to be put in the LOTW file"
10064	" have been copied into the QSL file."
10065	"File error loading "
10066	" : File not found"
10067	"No QSL flags found."
10068	" QSOs have been copied into the QSL file.  Do you want to flag these QSOs to show a QSL was sent?"
10069	"Delete QSL flags?"
10070	" flagged to be put in the QSL file"
10071	"File error writing ADIF File."
10072	"Unable to cancel sounds queue, and free the sound card resource."
10073	"Command aborted."
10074	"Failed to open Comm "
10075	"Serial port error"
10076	"The radio did not acknowledge the QSY instruction.  To avoid transmitting on your receive freq, I have abandoned the Transmit request."
10077	"Timeout"
10078	"The radio does not appear to be connected/responding.  You have a split TX/RX frequency of "
10079	" Hz set.  To avoid transmitting on your receive freq, I have abandoned the Transmit request.  Please clear the QSX Macro, execute a $simplex$ Macro, or connect the Radio."
10080	"Is your radio connected?"
10081	"Unable to start MMTTY RTTY Engine."
10082	"DLL Error "
10083	"Logbook Error = "
10084	"Error reading 'Typing Preference' part of the .INI file.  "
10085	" does not appear to be a valid entry"
10086	".INI Error"
10087	"Error reading 'Display' part of the .INI file.  "
10088	" does not appear to be a valid entry"
10089	"Error reading 'Form View' part of the .INI file.  "
10090	"Error reading 'Settings' part of the .INI file.  "
10091	"The radio did not acknowledge the QSY instruction.  You may still be receiving on your QSX frequency."
10092	"Error reading 'Tuning Window' part of the .INI file.  "
10093	"There is a conflict.  You have both the dedicated PTT serial port, and the Radio control serial port set to Comm "
10094	", this isn't going to work."
10095	"No can do..."
10096	"Sorry, this Macro is awesome.  However it is "
10097	" characters long.  The maximum length is 3000 characters.  You don't want to bore the other station to death (do you?)."
10098	"Too verbose"
10099	"Error in Fixed radio freq 1"
10100	"Wrong..."
10101	"Error in Fixed radio freq 2"
10102	"Error in Fixed radio freq 3"
10103	"Error in Fixed radio freq 4"
10104	"Sorry, there is no telnet connection"
10105	"Oops ..."
10106	"Sorry, the Cluster port in not open"
10107	"Telnet socket error : "
10108	"Can't respond to negotiation command "
10109	" is not a valid Canadian Province"
10110	"Input error ..."
10111	"CreateFileMapping API failed."
10112	"You can't get there from here"
10113	"MapViewOfFile API failed."
10114	"Sorry, you can not delete Profile 1."
10118	"Can't do this"
10119	"Please read the instructions carefully."
10120	"You can't fool me.  "
10121	" is not a valid frequency within the 300Hz to 3500Hz passband of your radio."
10122	"Invalid frequency"
10123	"Reported with the Microsoft utility SndVol32.exe"
10124	"Failed to position to correct location - "
10125	" in Logbook."
10126	"Sorry, only one instance of Logger32 allowed.  Logger32 is already running."
10127	"Error loading [Globals] section of "
10128	"Some features/functions of the program may not work correctly."
10129	"Unable to launch HTML Help,"
10130	"or the topic you requested does not exist"
10131	"You can not run the Logger32 data window and an external sound card application at the same time."
10132	"The external program will be terminated."
10133	"Ham CAP is not installed, or version too old"
10134	"Go to http://www.dxatlas.com/hamcap"
10135	"Winsock returned : "
10136	"Telnet error : "
10137	" : Comm port "
10138	"Comm "
10139	" appears as an Offset Prefix for "
10140	" appears to be a prefix for "
10141	"Unable to add "
10142	" as an alternative prefix to "
10143	"You are trying to delete "
10144	" from the Alternative Prefix database.  This the ARRL Prefix, and must appear in the alternative Prefix database too."
10145	"Invalid operation"
10146	"Delete of "
10147	" failed."
10148	" does not appear to be a valid alternative prefix."
10149	"You have changed the prefix from "
10150	"Are you sure you want to make this change ?"
10151	"Caution!"
10152	"Unable to ADD (or replace) "
10153	" to the Country File"
10154	"Error flushing the Country file"
10155	"Error reading "
10156	" from Alias file"
10157	"Error deleting "
10158	"The Alias "
10159	" was found in the Alias file.  It is a violation of the database rules to have a Prefix and an Alias the same.  I (in my infinite wisdom) have dropped the Alias "
10160	"Error writing "
10161	" to Alias file"
10162	"Error replacing "
10163	" in the Alias file"
10164	" from Offset file"
10165	" in Offset file"
10166	"Error flushing Offset file"
10167	"Error flushing Alias file"
10168	"What do you want to delete?"
10169	"I can't find this prefix!"
10170	"Are you ABSOLUTELY sure you want to delete "
10171	" from Country file."
10172	"Error flushing Country file"
10173	" is an Alternative for "
10174	".  Alternative Prefixes (Aliases) are not deleted here."
10175	" already exists"
10176	"Failed to add data."
10177	"Error adding "
10178	"Duplicate Entry"
10179	"Error flushing Offset file"
10180	"What row am I attempting to verify?"
10181	"Invalid entry"
10182	" does not look like a valid offset for "
10183	"What Prefix/Country is this an offset for?"
10184	"Are you trying to confuse me?  What Zone number is "
10185	"Are you trying to confuse me?  What ITU Zone is "
10186	"Latitude can only be between "
10187	"-90 and +90 degrees."
10188	"Longitude can only be between "
10189	"-180 and &180 degrees"
10190	"Are you trying to confuse me?  What Time zone offset is "
10191	"I can't find "
10192	"Error rewriting "
10193	" to Offset file"
10194	"You have changed the Offset Prefix.  This is not allowed.  To modify an existing Offset Prefix, you must delete the existing entry, and add a new entry."
10195	"I have looked at this 50 times, and can't figure out what you're trying to do.  Tab Order numbers must be in the range 1 to 12 only, and no duplicate numbers are allowed."
10196	"Input error setting up Logbook Entry window Field Tab Order."
10197	"File error loading "
10198	"File error loading ARRLSection data"
10199	" does not appear to be a valid US State."
10200	" does not appear to be a valid prefix for "
10201	" does not appear to be a valid US County."
10202	" does not appear to be a valid County in "
10203	"Error accessing "
10204	" in the Country database."
10205	"File error loading "
10206	"File error loading ARRLSubMode data"
10207	"I can't find "
10208	" on "
10209	.  Please check your Band/Mode setup."
10210	"Failed to position to end of SerialNumber index."
10211	"The BandPlan has no entries that match a frequency of "
10212	"Wow, a QSO that ends before it started!  You're too quick for me, I can't keep up."
10213	"Unable to start CW Machine ..."
10214	"This is an advisory message only."
10215	"I have noted your selection, but have not changed any port states. To make the change(s) effective, you must manually close and re-open the port(s)."
10216	"Add what?  I see no shortcut to be added."
10217	"Que Pasa?"
10218	"An entry for "
10219	" already exists."
10220	"Set your default Telnet connection to what?  I see no shortcut to be use."
10221	"Delete what?  I see no shortcut to be deleted."
10222	"I do not find an address for "
10223	" to modify."
10224	"The program will continue to load, but no Logbook will be opened.  When Logger32 is running, you must first open a new Logbook, or select a valid Logbook path."
10225	"Click on the FILE menu, and then select CHANGE LOGBOOK."
10226	"Logbook path not found, and unable to create a new Logbook."
10227	"Your PC is set up for "
10228	" in "
10229	"  Your PC Language ID is "
10230	"To use the multi language capabilities of Logger32, you must identify the language translation DLLs that are available.  Choose the language you want to see Menus and Error/Warning messages in.  Rename the DLL to "
10231	"Error opening "
10232	"Program will abort."
10233	"db Open Error : "
10234	".  Logger32 can not find (or create) the Logbook."
10235	"Please check this is a valid path name on your system, and the file name does not contain any of the following characters \ / : * ? < > or |"
10236	"Error opening Logbook : "
10237	"What Prefix is this ?"
10238	"Strange Country name!"
10239	"What Continent?"
10240	"Invalid Zone number"
10241	"Invalid ADIF number"
10242	"Check the Latitude!"
10243	"Check the Longitude!"
10244	"An ITU Zone of "
10245	" is invalid."
10246	"Can't find my Latitude/Longitude"
10247	"Can't find DX station Latitude/Longitude"
10248	"Unable to access Offset database"
10249	"File error loading "
10250	"Error opening record for modification."
10251	"db Write Error : "
10252	"Use of this program for QSOs with stations using two letter callsigns (or less) is explicitly forbidden!"
10253	"The Callsign field is limited to a maximum of 20 characters."
10254	"There is no US State recorded for this QSO.  "
10255	" is in what State?  First you must enter a US State, then enter the County."
10256	"This field can not be edited.  You must change the DXCC entry by right-clicking the mouse on the QSO entry, and choose the 'Edit Country info' option."
10257	"Edit the DXCC Field."
10258	" does not appear to be a valid grid square."
10259	"Right click on the QSO.  Select Edit QSL info.  Edit the QSL Sent and QSL Received info."
10260	"Use the Edit QSL info window."
10261	" does not appear to be a valid date."
10262	"You are deleting the US State for this QSO.  You have left "
10263	" entered as the County.  What State is "
10264	" does not appear to be a valid time."
10265	"Selected format is "
10266	"Sorry, I do not recognize what ADIF field type this is"
10267	"Because of duplicate QSO time(s), the QSO time has been incremented to : "
10268	"Time incremented"
10269	"I tried incrementing the time in one second steps twenty times, but failed to find an unused time slot.  Please use a QSO time that is not a duplicate."
10270	"Duplicate QSO time(s)"
10271	"Unable to add modified record with primary key : "
10272	"Unable to delete original record with primary key : "
10273	" does not appear to be a valid ADIF Continent.  I double checked my map."
10274	"Correct formats are : AF, AN, AS, EU, NA, OC or SA."
10275	"CQ Zones are in the range from 1 to 40."
10276	" does not appear to be a valid ADIF defined SUBMODE for the "
10277	"Error modifying the "
10278	" with the following data : "
10279	" is not a valid ARRL Section in your ARRLSect.db file."
10280	" is not a valid Band in your "
10281	" file."
10282	" is not a valid ADIF MODE or SUBMODE"
10283	" in your "
10284	" is not shown in your BandPlan."
10285	" is not a valid entry.  "
10286	" must be 'Y' or 'N'."
10287	"There is a problem with your Tab Order entries.  The allowed range is from 1 to 12 only.  No duplicates are allowed."
10288	" is already listed as a County in the State of "
10289	"Are you absolutely sure you want to add "
10290	" as a County in the State of "
10291	"Have you verified that "
10292	" is a valid County in "
10293	" for County awards?"
10294	"Are you absolutely sure ..."
10295	" is not listed as a County in the State of "
10296	"Are you absolutely sure you want to delete "
10297	"Have you verified this deletion is valid?"
10298	"Failed to delete US County "
10299	" from "
10300	"Error : "
10301	"Update what?  "
10302	" is already listed as a County in the State of "
10303	".  Also, the recorded Latitude and Longitude do not appear to have changed."
10304	"Update what?  You do not appear to have made an original selection of State and County to be updated."
10305	"Are you absolutely sure you want to modify the record for "
10306	" with the current date in the edit window?"
10307	"Have you verified this change is valid for the US County award?"
10308	"Failed to delete US County "
10309	"Failed to add US County "
10310	" to "
10311	"Longitude entry must include either E or W."
10312	"Latitude entry must include either N or S."
10313	"Sorry, there are only 60 seconds in a minute."
10314	"Sorry, there are only 60 minutes in a degree."
10315	"Sorry, the maximum Latitude is 90 degrees."
10316	"Sorry, the maximum Longitude is 180 degrees."
10317	" already exists in this database."
10318	"IOTA Island "
10319	" already exists in this database under "
10320	"Add what?  I find nothing selected."
10321	"This action will permanently remove IOTA "
10322	" from the database."
10323	"Are you sure this is what you want?"
10324	"Unable to delete "
10325	" from the IOTA Island database for IOTA number "
10326	"This action will permanently remove IOTA Island "
10327	" in the IOTA Island database."
10328	"There appears to be no Island name in the row you selected."
10329	"Are you sure you want to change the IOTA Island name from "
10330	" to the IOTA Island database."
10331	" from the IOTA Island database."
10332	"Modify what?"
10333	"The Island name has not changed, the Latitude has not changed, the Longitude has not changed."
10334	"Error modifying "
10335	" in IOTA Island database."
10336	"Error while trying to "
10337	" the IOTA database."
10338	" is an invalid IOTA number.  The correct syntax is AA-XXX where 'AA' is the Continent, and 'XXX' is a three digit number."
10339	"Valid Continents are Africa - AF, Antarctic - AN, Asia - AS, Europe - EU, North America - NA, Oceana - OC, and South America - SA."
10340	"Examples are : AS-009, AF-022, NA-123, EU-087, SA-104, etc."
10341	"Invalid IOTA"
10342	"A callsign is a mandatory database entry"
10343	" County in?  First you must delete the County, then the State."
10344	"Error writing QSO to Logbook"
10345	"Error flushing Logbook."
10346	"Error updating QSL data for this QSO with "
10347	"Which row do you want to delete?  You must first select a row. then I'll know which row to delete."
10348	"Where do you want to add a row?  You must first select a row. then I'll know where you want to add a new row."
10349	" is a higher frequency than "
10350	"Array elements appear out of order.  In the Lower Frequency column, entries must be in descending order (Higher Frequencies on top)."
10351	"Check the entries :"
10352	" does not appear to be a valid ADIF defined Band."
10353	"Correct syntax is 40M, 20M, 6M, 2M, 70CM, 23CM, 1.25CM, 6MM, 2.5MM, etc."
10354	" does not appear to be a valid ADIF defined mode or submode."
10355	"Correct syntax is CW, RTTY, SSB, etc."
10356	" does not appear to be a valid ADIF defined Frequency."
10357	"Correct syntax is in MHz - 14.000, 21.00000, 28.000000, etc."
10358	" does not appear to be a valid Report."
10359	"Correct syntax is 59 or 599."
10360	" does not appear to be a valid mode selection for your radio."
10361	"Correct syntax is CW, USB, LSB, RTTY, PKT, etc."
10362	" does not appear to be a valid ADIF defined Transmitter Power."
10363	" does not appear to be a valid entry for the Stats column.  If you want to include this Band/Mode in the Stats window, enter Y or N if you do not want the Stats window to include the Band/Mode."
10364	"Valid input for Antenna Selection is in the range 1 to 8"
10365	"Valid input for Radio # is 1 or 2"
10366	"Unable to locate Time Zones information in Registry under the key : "
10367	"Registry problem?"
10368	"You can't read directly from the BAD.ADI file.  If you want to import records from this file, you must fix the bad records (it is not necessary to edit out the Logger32 error messages - they are ignored).  Then rename the file to 'Fixed.adi', and import the file again."
10369	"Can't import this file ..."
10370	"             Yes       -  to replace the existing file,"
10371	"             No         -  to append to the existing file."
10372	"             Cancel  -  to choose another file."
10373	" exists"
10374	"You are not allowed to do this!"
10375	" is a database file used by Logger32.  Choose another filename for your export ..."
10376	"This does not appear to be a LoTW.ADI file"
10377	"Wrong file type."
10378	"This does not appear to be a eQSL.ADI file"
10379	"I have read 5000 characters of the file, and I haven't found an <EOH> end of header marker, or an EOR> end of record, so I give up"
10380	"Invalid file format"
10381	"If imported QSOs have no OPERATOR field, they will default to the current user : "
10382	"OK to continue.  Cancel to exit."
10383	"User is "
10384	" : loading record - "
10385	"Error loading ADIF record."
10386	"No valid ADIF records found"
10387	"Nothing to do"
10388	" QSOs read.  "
10389	" QSOs were updated."
10390	"LoTW Sync summary"
10391	"eQSL Sync summary"
10392	"The QSOs were loaded with "
10393	" as the default operator (if no OPERATOR field was read)."
10394	"ADIF import summary"
10395	"Error writing QSO to Logbook"
10396	"Are you sure you want to fill each CONTEST_ID field for the imported QSOs with '"
10397	"You have identified this as an ADIF file from a Contest.  Be very careful to make sure that all fields in this ADIF file are used for the purpose you expect.  Not all programs use ADIF fields for the same purpose."
10398	"Correct Contest ID?"
10399	"File error loading "
10400	"Error while trying to maintain referential integrity."
10401	"File error loading Keps."
10402	"Error reading data file.  I copied Line 1 of "
10403	" as : "
10404	"Error reading data file.  I copied Line 2 of "
10405	"Invalid Latitude!  Enter as a decimal value."
10406	"Invalid Longitude!  Enter as a decimal value."
10407	"Attempting to load more than 100 Satellites in an array that is built for only 100!  Sorry, no can do."
10408	"Too small"
10409	"Data for "
10410	" Satellites appears to have been loaded into memory correctly.  Do you want to save this data to disk?"
10411	"If you do not save to disk, the newly loaded data will be flushed from memory, and the original data (if any) reloaded."
10412	"Save to disk?"
10413	"Save data?"
10414	"It appears no Satellite elements were loaded correctly.  Please check the format of the data."
10415	"Invalid data"
10416	"There are no Keplarian elements for "
10417	" loaded in memory."
10418	"What to do?"
10419	"File error saving KEPS.TXT"
10420	" is not a valid drive letter."
10421	"The correct format is C: or D: or E: etc."
10422	"Error in Frequency Marker 1.  Entries must be between 300 and 3500 Hz, and must be numeric."
10423	"Error in Frequency Marker 2.  Entries must be between 300 and 3500 Hz, and must be numeric."
10424	"Error in Frequency Marker 3.  Entries must be between 300 and 3500 Hz, and must be numeric."
10425	"Error in Frequency Marker 4.  Entries must be between 300 and 3500 Hz, and must be numeric."
10426	"Error in Marker Width.  Entries must be between 1 and 5, and must be numeric."
10427	"Failed to position to correct location - "
10429	"A callsign is a mandatory database entry"
10430	" is not a valid frequency."
10431	" is not on "
10432	" in the QSLSDATE field does not appear to in the correct format."
10433	"Format is "
10434	" in the QSLRDATE field does not appear to in the correct format."
10435	" is not a valid ADIF DXCC number."
10436	"Error writing QSO to Logbook"
10437	"The QSO you are adding has the same time as a QSO with "
10438	" in the Logbook."
10439	"To try to add this QSO again, click the button to increment the time slightly."
10440	"Error : Duplicate time"
10441	"Radio Type "
10442	" is not supported."
10443	"Unsupported Radio type"
10444	"Drive "
10445	"\ not found."
10446	" does not exist.  Create it?"
10447	"Directory not found"
10448	"Error writing to QSO number "
10449	"Failed to read records from "
10450	"Oops, that didn't work.  Do you have a connection to the internet?"
10451	"Internet connection failed"
10452	" is not a valid ADIF Mode in you ADIFModes.txt file.  Stats can not be updated."
10453	"ADIF Mode not recognized"
10454	"Unsuccessful. Error # "
10455	" occurred. "
10456	"Description : "
10457	"Please insert disk #"
10458	"Warning #"
10459	" occurred while processing "
10460	"Golist lookup failed.  GOxxx.REC file not valid."
10461	"Golist"
10462	"Golist lookup failed.  GOxxx.OVL file not found or is corrupt."
10463	"Golist lookup failed.  No callsign provided for lookup."
10464	"Unable to delete notes from QSO with "
10465	"Notes update failed"
10466	"Unable to locate the selected Note"
10467	"Note lookup failed"
10468	"Unable to Modify Notes from QSO with "
10469	"Something is wrong, I got lost.  I can't find the selected QSO."
10470	"Error : No Logbook Page window"
10471	"Error : No record selected"
10472	"Error : No record found"
10473	"Oops!  There are already notes for this QSO with "
10474	"Do you want to overwrite these Notes?"
10475	"Unable to add Notes to selected QSO with "
10476	"File error writing UQF."
10477	"Logger32 in not connected to the AGW Packet Engine."
10478	"You have no Radio Type selected"
10479	"Replace existing file - "
10480	"You have no Comm port selected for the Data Terminal."
10481	"Select a Comm port"
10482	" : Comm port "
10483	" : File not found"
10484	" : Error # "
10485	"Sorry, this Macro is awesome.  However it is "
10486	" characters long.  The maximum length is 3000 characters.  You don't want to bore the other station to death (do you?)."
10487	"DVK PTT port error"
10488	"Alpha 87A Comm port :"
10489	"Can't open Excel."
10490	"You must have Microsoft Excel installed on your PC."
10491	"Sorry, no can do ..."
10492	"Excel is already running.  You must first close any Excel applications that are running."
10493	"Can't open Excel workbook."
10494	"Unable to open "
10495	"Unable to copy Excel worksheet "
10496	"File copy error ..."
10497	"Unable to Create File Handle",
10498	"Update failed ..."
10499	"The clock error must be a numeric value between -20000 and +20000."
10500	"Entry error ..."
10501	"You must close the sound card window, and reopen it for changes to be effective."
10502	"What map style do you prefer?"
10503	"Can't connect to AGW Packet Engine"
10504	"Please configure your Callsign and/or Cluster station in the Setup Menu"
10505	"This is a "
10506	" QSO.  Your Logbook is set for "
10507	"No HamCall password found.  To set up your password, click on ToolBox, and set up your password."
10508	"See : http://hamcall.net for more information."
10509	"What callsign do you want me to lookup?"
10510	"User name : "
10511	"Note : If you change the font name, you MUST use a TrueType Font.  If you do not, the text will not be printed vertically."
10512	"Warning message ..."
10513	"Radio "
10514	" is not responding to polls.  I will switch back to radio "
10515	"Timeout ..."
10516	"This is a multi-line Note.  You cannot edit this note here.  Right click on the QSO and select Edit QSO from the options."
10517	" Com "
10518	" open "
10519	" closed "
10520	" Not loaded. "
10521	" Data Terminal not loaded "
10522	" No Com port "
10523	" : Com "
10524	" Antenna Selected - "
10525	" : Does not use Com port "
10526	" Serial Numbers disabled "
10527	" Serial Numbers enabled : "
10528	" PC time : "
10529	" records could not be checked.  "
10530	"Please see the error file BAD.ADI where they have been saved with comment about why they were not checked."
10531	" Mhz.  The Band and Mode have not been changed."
10532	" Mhz.  The Mode has not been changed."
10533	"The Mode has not been changed."
10534	"Aerial selection must be in the range 0 to 15"
10535	"Error in the row "
10536	" Socket closed "
10537	" No rotor "
10538	"Disabled"
10539	"No radio"
10540	"There is no additional information for "
10541	"Database structure of the Logbook "
10542	" is incorrect,"
10543	"Logbook validity is questionable.  Zip your Logbook(s).  Export this Logbook in ADIF format.  Stop Logger32.  Delete the Logbook.  Run Logger32 (which will create a new empty Logbook).  Re-import the ADIF file."
10544	" Local Sunrise "
10545	" Sunset "
10546	"Polar night"
10547	"Polar day"
10548	"Remove "
10549	" DX Spots"
10550	" Click to turn Short Path "
10551	" Click to turn Long Path "
10552	"Close Excel now?"
10553	"I can't close Excel, try closing Excel from the Task Manager."
10554	"Rotor offset must be in the range -360 to 360"
10555	"Request denied"
10556	"This is very complicated.  You have requested a colored topographical map overlay.  To do this, I have to calculate "
10557	" spatial trigonometric calculations.  It'll take a couple of minutes..."
10558	"If you want to wait that long, click on OK, otherwise click CANCEL, and I won't do the calculations."
10559	"QRX ..."
10560	"You are QSLing an incomplete QSO.  Sorry, this is not allowed"
10561	"Magic!"
10562	"This is an incomplete QSO, no 'to be QSLed' flags have been set" 
10563	"I'm trying to keep you honest"
10564	"Configuration - "
10565	"There are no QSOs in this Logbook with data in the "
10566	" field."
10567	"Unable to change sort order."
10568	"There are "
10569	" QSOs in this logbook.  As a precaution, it is recommended you backup your Logbook before importing data of unknown validity."
10570	"Do you want to Backup your Logbook before importing this ADIF file?"
10571	"Time to backup?"
10572	"Nothing more to do"
10573	"User aborted the process."
10574	"Warning : The version of lotwreport.adi you are using does not contain the full information required for this operation.  If you continue only the QSL receive flag will be set and no additional data (DXCC, IOTA, etc.) will be verified.  See the help file for details on how to obtain a more complete file from LoTW."
10575	"Questionable input file ..."
10576	"Do you wish to continue using this file?"
10577	"This field can not be edited.  You must change the STATE entry by right-clicking the mouse on the QSO entry, and choose the 'Edit State info' option."
10578	"Please close the Sound Card Data Window before attempting to Recalc.  Received data on the Sound Card causes database activity, this may interfere with the Recalc process."
10579	"Not allowed ..."
10580	"Please close the Data Terminal Window before attempting to Recalc.  Received data on the Data Terminal causes database activity, this may interfere with the Recalc process."
10581	" does not appear to be a valid Primary administrative subdivision in "
10582	"There is no Primary Subdivision entered, I can't check the Secondary Subdivision '"
10583	"' does not appear to be a valid Secondary Subdivision of '"
10584	"' does not appear to be a valid Secondary Subdivision."
10585	"Unable to start CW Machine"
10586	".DLL language DLL is not compatible with Logger32 version "
10587	"Program will continue to load English [US] menus ..."
10588	"DLL incompatibility"
10589	"You have a potential conflict in your setup.  You have selected to automatically add WWV/WCY messages to the Comments field of your Logbook.  You have also selected to copy the Comments field from previous QSOs to your current QSO comments field.  By doing this, the current QSO will be logged with all previous Comments (including WWV/WCY reports) and the current WWV/WCY report."
10590	"Potential conflict"
10591	"The database file 'Mapper.pnt' not found."
10592	"The database file 'paintma.txt' not found."
10593	"The file 'LoTW-mismatch.txt' already exists."
10594	"Click YES to create a new file (the current file will be deleted)."
10595	"Click NO to append this report to the end of the current file."
10596	"Create new file?"
10597	"The rotor correction must be in the range of -360 to 360."
10598	" is already in the database !"
10599	"Could not delete "
10600	" has been deleted, but "
10601	" could not be added."
10602	"The file : "
10603	" already exists."
10604	"Delete this file?"
10605	"Unable to load : "
10606	"DXCC field is not in the correct format"
10607	" is not a valid DXCC number."
10608	"CNTY field is not in the correct format"
10609	"The Primary Code or Secondary Code field is blank.  These are mandatory fields"
10610	"Failed to resolve DXCC# for "
10611	"Failed to add record"
10612	"Delete failed."
10613	"' does not appear to be a valid Primary admin subdivision in "
10614	"The 'Code' field is blank.  This is a mandatory field"
10615	"Failed to resolve DXCC# for "
10616	" is not a valid Primary administrative subdivision in "
10617	"I see no Secondary admin subdivision database entries for "
10618	"The Secondary administrative subdivision database contains records for the "
10619	" award.  To import new data for "
10620	", I must first delete all existing records for "
10621	"Click OK to continue and delete the records.  Click Cancel to try something else."
10622	"Delete records?"
10623	"I see no Primary admin subdivision database entries for "
10624	"Nothing to export ..."
10625	"The Primary administrative subdivision database contains records for "
10626	".  To import new data for "
10627	"' for validity."
10628	"You can enter a numeric value only.  Unit of measurement will default to '"
10629	"For DISTANCE, you can enter a numeric value only.  Unit of measurement will default to '"
10630	"Sorry, no sound cards detected !"
10631	"Unable to resolve the SoundCard ID"
10632	"A Child Window was moved.  I have turned off the Lock Child Window option"
10633	"Setting changed"
10634	"What profile is selected?"
10635	"Selected profile?"
10636	"Valid input for Radio Antenna # is 0 to 9"
10637	"LoTW sync data mismatches..."
10638	"I don't find MMTTY.EXE in the Logger32 directory"
10639	"The correct format is x, x y|z or xy|z."
10640	"x = The default radio to use (1 or 2)"
10641	"y = The antenna on radio 1 to use (0 if no aerial is to be selected)"
10642	"z = The antenna on radio 2 to use (0 if no aerial is to be selected)"
10643	"You have not setup MMTTY SO2R to operate in it's own directory."
10644	"For best results you should modify your configuration"
10645	"See Help section - "
10646	"Configuration change needed"
10647	"I can't find the file: "
10648	"MMTTY.EXE not found"
10649	"Failed to invoke: "
10650	"Can't start MMTTY.EXE"
10651	"www.iota-world.org returned this message ..."
10652	"A message from the folks at IOTA for you ..."
10653	"Logger32 loop time is set to "
10654	" sec.  The max loop time for microHAM is 9 seconds.  I have temporarily adjusted the loop time to 9 sec."
10655	"Loop time error ..."
10656	"Auto"
10657	"lookup"
10658	"DVK port error"
10659	"Failed to start utility program #"
10660	" must be 'Y' or 'N'."
10661	"This will not do anything, you must select more options."
10662	"Failed to add to "
10663	"Failed to update "
10664	"Can't find: "
10665	"ADIF.TXT file error"
10666	" in your ADIF.TXT file."
10667	"Changes were made to Phone/Digital modes.  It is recommended you recalculate statistics to reflect the change."
10668	"Need to recalculate stats ..."
10669	"You have setup Logger32 to use the Radio Mode as the logging mode.  The radio is currently on '"
10670	"'.  This is not a valid ADIF mode."
10671	"To map the radio mode to an operating mode, click TOOLS | DATABASE MAINTENANCE | SETUP PHONE/DIGITAL MODES."
10672	" : SO2R Comm port "
10673	"You are setup to log/display frequency.  You are trying to log this QSO with a frequency of 0.00"
10674	"This QSO will not be logged."
10675	"Close SO2R Port"
10676	"all operators"
10677	" only"
10678	"Results are for "
10679	"Make up your mind.  You have selected "
10680	" as both SUBMITTED and GRANTED.  Which is it?"
10681	"Something is wrong.  You "
10682	" award.  There is no "
10683	" information in this QSO record."
10684	"You have two Secondary Admin Subdivision awards checked.  There is only one logbook field defined for Secondary Admin Subdivision.  Only one award can be selected."
10685	"You have no Secondary Admin Subdivision database entered."
10686	"You have no Countries selected."
10687	" is not in the correct format."
10688	"Something is wrong!  After making adjustments for a transverter, I calculated a negative frequency"
10689	"You have a Secondary Admin Subdivision award checked.  The Secondary Admin Subdivision field for this QSO is empty."
10690	"You have not selected any operators.  There is nothing to export"
10691	"Block DX Spots for "
10692	"Block DX Spots by "
10693	"Unable to read "
10694	"Structure of the QSOs Credited database is not in the current format."
10695	"a) Stop Logger32."
10696	"b) Delete the four "
10697	"c) Re-start Logger32 and recalc the stats for each of your logbooks."
10698	"Structure of the Stats database is not in the current format."
10699	"> 1 hour ago"
10700	"1 minute ago"
10701	" minutes ago"
10702	"< 1 minute ago"
10703	"Need "
10704	" on "
10705	" on any Band/Mode"
10706	"Need on "
10707	" WPX on "
10708	" for WPX"
10709	"Error writing to eQSL Dump File.txt"
10710	"There are no QSOs flagged to be put in the LoTW file"
10711	"There are no QSOs flagged to be put in the eQSL file"
10712	"There are no QSOs flagged to be put in the QSL file"
10713	"Local Host socket error : "
10714	"Rotor serial port has disappeared!  Did you unplug the USB cable?"
10715	"Radio 1 serial port has disappeared!  Did you unplug the USB cable?"
10716	"Radio 2 serial port has disappeared!  Did you unplug the USB cable?"
10717	"I have closed the Rotor port."
10718	"I have closed the Radio 1 port."
10719	"I have closed the Radio 2 port."
10720	"Serial port error: "
10721	"DVK serial port has disappeared!  Did you unplug the USB cable?"
10722	"I have closed the DVK port."
10723	"Data Terminal serial port has disappeared!  Did you unplug the USB cable?"
10724	"I have closed the Data Terminal port."
10725	"Cluster TNC serial port has disappeared!  Did you unplug the USB cable?"
10726	"I have closed the Cluster TNC port."
10727	"Alpha amplifier serial port has disappeared!  Did you unplug the USB cable?"
10728	"I have closed the Alpha amplifier port."
10729	"The height of the "
10730	" note exceeds the height of the Notes Window.  The complete note will not be visible.  Either write a shorter note, or increase the width and/or height of the Notes Window."
10731	"This will not work correctly.  Using MMVARI's internal FSK generator requires Logger32 to specify a serial port for MMVARI to use.  Click the menu SETTINGS | RADIO PTT OPTIONS and choose a serial port."
10732	"This will not work correctly.  Using MMTTY's internal FSK generator requires Logger32 to specify a serial port for MMTTY to use.  Click the menu SETTINGS | RADIO PTT OPTIONS and choose a serial port."
10733	"OTRSP serial port has disappeared!  Did you unplug the USB cable?"
10734	"I have closed the OTRSP port."
10735	"Error writing to ADIF audit trail.txt"
10736	"You have selected SUBMITTED for a "
10737	" credit on "
10738	".  This QSO was before credit for "
10739	" is acceptable.  Credit will not be granted."
10740	" is acceptable.  Credit can not be granted."
10741	"Process aborted"
10742	"The correct format is x or x|y where x and y are the number of the rotor to be used and is in the range of 0 to 9."
10743	"Valid input for rotor # is in the range 0 to 9"
10744	"No rotor selected.  What do you want me to APPLY?"
10745	" Rotor port not configured "
10746	" is not a valid transverter frequency."
10747	"  This QSO with "
10748	" doesn't seem to have any "
10749	" information entered.  I can't get there from here."
10750	"You have selected a different QSO in the Logbook.  Editing in progress is aborted."
10751	"No SWL number entered"
10752	"Operator malfunction"
10753	"There is a problem with database synchronization.  The statistics do not match your logbook."
10754	"Please recalculate your statistics."
10755	"No LocalHost session found."
10756	"Nice try, but how are you going to apply for DXCC credit without a QSL card?"
10757	"There are no QSOs flagged to be put in the DXCC file"
10758	" flagged to be put in the DXCC file"
10759	" have been copied into the DXCC file."
10760	"No DXCC flags found."
10761	" have been copied into the DXCC file.  Do you want to remove the flags?"
10762	"Delete DXCC flags?"
10763	"Today is your lucky day!  Version "
10764	" of Logger32 is ready for installation.  This is an automated process.  Relax and enjoy."
10765	"Read the release notes and download/install it now?"
10766	"Logger32 automatic update installer"
10767	"Sorry, there is no telnet connection"
10768	"Sorry, there are no new updates."
10769	"No internet connection detected."
10770	"Local Host socket error : "
10771	" not found."
10772	"Maybe later."
10773	"I waited 10 seconds and got no response from the server."
10774	"Download error ..."
10775	" bytes expected.  "
10776	" downloaded."
10777	" while downloading "
10778	" is empty."
10779	"I can't do anything with this."
10780	"Error: Empty file"
10781	"  You have created a file that corrects some of the errors from the ARRL input file for your "
10782	" DXCC granted statistics.  These corrections will be erased and you must make them again."
10783	"You have chosen to erase all existing ARRL credits granted.  If, for some reason, there are records from the ARRL that I can't verify, the granted status is gone forever.  You will have to recover manually, or by restoring the Logbook I just backed up for you."
10784	"Are you sure to want to delete all existing ARRL credits granted?"
10785	"The QSOs that could not be updated are in a file: "
10786	" QSOs updated."
10787	" QSOs not updated."
10788	"Results ..."
10789	"I don't find a file with a list of ARRL QSO records that don't match the "
10790	" logbook.  First you must generate a list of errors from the ARRL download, then you (and I'll help) can correct the errors."
10791	"Go back to the Batch Credit granted update window, select the 'add only ...' option.  When that is completed then you can correct any errors."
10792	"File not found ..."
10793	"This can be very dangerous!"
10794	"Batch updates to the ARRL granted credits is very slow, and may take as long as 30 minutes.  If you want to attempt a batch update, it is strongly recommended that after clicking OK, you immediately disconnect from all Telnet and Cluster connections, or click CANCEL to come back and try later when you have more time."
10795	"Read carefully ..."
10796	"Sorry, I checked each error but couldn't find any QSOs in your logbook that matched the information from the ARRL.  Looks like I've already corrected all the ones I could.  You'll have to complete this manually."
10797	"You're on your own ..."
10798	"I have found/matched "
10799	" QSOs in your logbook for entries in the QSL/LoTW list from the ARRL that could not be matched with the basic information provided."
10800	"Click OK then run Batch Credit 'Only add new credits' option to apply these corrections to you logbook."
10801	"I'm here to make your life easier ..."
10802	"You made " 
10803	" to errors in the ARRL data."
10804	"1 manual correction"
10805	" manual corrections"
10806	"IOTA Spot map is currently showing "
10807	"DX Spot map shows "
10808	" DX stations"
10809	" IOTA stations."
10810	"uHam serial port has disappeared!  Did you unplug the USB cable?"
10811	"I have closed the uHam port."
10812	"Heading"
10813	""
10814	"Distance"
10815	"There are QSOs in the logbook scratchpad that have not been logged.  You must clear the scratchpad before closing Logger32."
10816	"You can't quit now"
10817	"I can't stop Logger32 while there are QSOs in the logbook scratchpad that have not been logged.  You must clear the scratchpad before downloading/installing a new version."
10818	"You can't do this now"
10819	" Scratchpad"
10820	"Callsign"
10821	"Freq"
10822	"Time"
10823	"Sent"
10824	"Rcvd"
10825	"Name"
10826	"DX Spot comments"
10827	"Clean sheet of paper"
10828	"Swap Log entry with scratchpad"
10829	"Move Log entry to scratchpad"
10830	"Rx window bold callsign text color"
10831	"Rx window bold callsign back color"
10832	"Radio 1 use EXTFSK64 for RTTY keying"
10833	"Radio 2 use EXTFSK64 for RTTY keying"
10834	"Radio 1 uses EXTFSK64"
10835	"Radio 2 uses EXTFSK64"
10836	"OQRS Direct request sent"
10837	"OQRS Bureau request sent"
10838	"Show sent OQRS request highlight"
10839	"Show beacon DX Spots"
10840	"Enable BandMaps Freeze"
10841	"Enable DX Spot Window Freeze"
10842	"Read release notes"
10843	"Enable cluster freeze"
10844	"Enable telnet freeze"
10845	"Enable AGWpe freeze"
10846	"Enable Localhost freeze"
10847	"Transmit && PTT using 2Tone"
10848	"You are setup for 2Tone RTTY keying, but 2Tone isn't loaded"
10849	"Start CW Machine"
10850	"275 twips"
10851	"305 twips"
10852	"325 twips"
10853	"350 twips"
10854	"375 twips"
10855	"400 twips"
10956	"599 highlight color"
10957	"Enable error trapping"
10958	"Hide line"
10959	"Single line width"
10960	"Setup rotor direction wedge"
10961	"Set rotor direction color"
10962	"Receive text font && size"
10963	"Show VFO split in title bar"
10964	"Frequency marker B color"
10965	"Show frequency marker B - Split"
10966	"Show frequency marker B - Always"
10967	"There is a callsign in the Logbook Entry window that has not been logged.  You must clear the callsign before closing Logger32."
10968	"I can't stop Logger32 while there is a callsign in the Logbook Entry Window that has not been logged.  You must clear the Logbook Entry Window before downloading/installing a new version."
10969	"Allow program close with populated callsign"
10970	"Show floating clock"
10971	"Show Country name"
10972	"Country text font && size"
10973	"UltraBeam serial port has disappeared!  Did you unplug the USB cable?"
10974	"Callsign field forecolor"
10975	"Show DX station local time"
10976	"Time text font && size"
10977	"Maximum length of TX_PWR field is 10 characters."
10978	"TX_PWR is a numeric field only."
10979	"Full Prefix synchronization"
10980	"Show band columns in reverse order"
10981	" days ago"
10982	"Enable DX Spot no split macro"
10983	"Echo port configuration"
10984	"Echo"
10985	"I have closed the Echo port.
10986	"Show Echo Port debug window"
10987	"Remove Export QSL flags"
10988	"Use numeric pad +/- keys for BandMap navigation"
10989	"Delete"
10990	"_SWL_DUMP_FILE.ADI"
10991	"Add"
10992	"to Highlight/Audio Alerts"
10993	"Assign SPACE key"
10994	"Assign ENTER key"
10995	"Show digital heading"
10996	"Background color"
10997	"Glass form"
10998	"Glass && borderless form"
10999	"Exit"
11000	"Enable turn rotator on DX Spot click"
11001	"Setup DX Spot alerts (eMail/SMS/Scratchpad)"
11002	" alert"
11003	" alert on "
11004	" NEW COUNTRY"
11005	" need on "
11006	"Another gratuitous DX Spot"
11007	"Rollback to previous version"
11008	"Enable CQ and DE highlight"
11009	"Rx window CQ and DE color"
11010	" is not a valid range of QSO numbers."
11011	"Edit QSO Start/End time"
11012	"Adjust DX Spots/logging for audio freq (not RTTY FSK)"
11013	"Synchronize IOTA (from a CSV file)"
11014	"Show station not QSOd this band/mode B4"
11015	"Show station not QSOd this band B4"
11016	"Allow automatic window height adjustment"
11017	" SPLIT OPERATION "
11018	"Unlock Visual Alert from Logbook Entry Window"
11019	"Enable receive freeze"
11020	"Enable overwrite of visible duplicate DX Spots"
11021	" (primary)"
11022	" (secondary)"
11023	" Countries."
11024	"custom startup titlebar that does not contain Logger32 in the text"
11025	" : Echo port COM "
11026	" "
11027	"Show LoTW/OQRS users in bold"
11028	"LoTW users text color"
11029	"Edit Country/Callsign Alerts list"
11030	"Edit DX Spot Comments Alerts list"
11031	"Need Z"
11032	" for WAZ on "
11033	"Synchronize LoTW (from Club Log)"
11034	"Submode"
11035	"At 50 MHz"
11036	"None of the above"
11037	"Load the LoTW users file (from Club Log)"
11038	"Today"
11039	"Yesterday"
11040	"OQRS user"
11041	"Is LoTW user"
11042	"Not LoTW user"
11043	"Not current LoTW user"
11044	"Not OQRS user"
11045	"Show OQRS user"
11046	"Show TCP Server"
11047	"Show LoTW User"
11048	"OQRS users text color"
11049	"LoTW && OQRS users text color"
11050	"Hide TCP server"
11051	"Show TCP Server"
11052	"Click to open WSJT/JTDX socket"
11053	"Click to close WSJT/JTDX socket"
11054	"  and "
11055	"Show text in local character set"
11056	"Show 48 buttons"
11057	"48 Macro buttons"
11058	"Show toolbar"
11059	"Enable UDP broadcast of DX Spots"
11060	"Slave port configuration"
11061	"Show Slave Port debug window"
11062	"Slave"
11063	"Slave serial port has disappeared!  Did you unplug the USB cable?"
11064	"I have closed the Slave port."
11065	"Send stop command to rotator"
11066	"CTL+Q to stop rotator"
11067	"Enable QSO updates from lookups"
11068	"Flag existing QSOs for QSLing"
11069	"If the first word of comments is a mode, use it"
11070	"Show not QSOd this band/mode B4"
11071	"Show JTDX Control Panel"
11072	"Column setup"
11073	"Show a column for SAT QSOs"
11074	"Summary grids matching data grid colors"
11075	"Highlight color of deleted entities"
11076	"QSO B4 X color"
11077	"Enable UDP broadcast of radio status"
11078	"Enable automatic rotator turns to LP"
11079	"Show rotator setup window"
11080	"Watermark color"
11081	"Setup help menu options"
11082	"Rebuild "
11083	" logbook"
11084	"Enable frequency change UDP Broadcast"
11085	"Column setup"
11086	"Get NOAA update"
11087	"Setup additional UDP ports"
11088	"Cancel"
11089	"Apply"
11090	"Loop"
11091	"Stop loop"
11092	"Abort"
11093	"Start"
11094	"Start WSJT/JTDX"
11095	"Open UDP BandMap"
11096	"Close UDP BandMap"
11097	"Change WSJT/JTDX UDP port # for "
11098	"Setup time delay for auto updates"
11099	"The sky is falling ..."
11100	"Setup Help menu options"
11101	"Change operator"
11102	"Browse"
11103	"Stop"
11104	"Fixed column/row grid color"
11105	"Show DX station local time && heading"
11106	"Hide window if no callsign"